Weld-on Bumper Shackle Mounts

(click image for large view)
Now you can build your own Xtreme-duty bumper shackle mounts welded directly to your custom off-road bumper. Cut to fit perfectly any standard 4x4 3/4" D-shackle. Notes: Use only on a well-made steel bumper. We recommend all welding to be carried out by a professional.

Sold in pairs.
Ready-to-weld finish.
Chamfered at the base for good weld penetration.
Fits our 3/4" D-shackles.
D-shackles sold separately.
U.S. made.
U.S. SHIPMENTS (lower 48)

Roll Cage Floor Plates

(click image for large view)

Ready for the roll cage tubing to be welded onto, our roll cage floor plates are laser cut as a 1/4" thick two-piece set consisting of a top plate and a corresponding bottom plate.

The two-piece set enables the roll cage to be tied into the frame for strength. The bottom plate is 1/2" bigger all around preventing floor pan shearing in the event of a roll-over. The 1/2" bolt hole allows up to 1/2" Grade 8 mounting hardware to be used.

The plates are shipped in bare metal ready to be welded on, then painted or powdercoated. Image shows plates with grey primer. Note: We recommend all welding to be carried out by a professional.

Sold in a set of two (2).
Ready-to-weld finish.
Ready for cage tubing to be welded onto.
1/4" thick steel with rounded corners.
3" X 2" bolt pattern. 1/2" bolt hole.
Top plate Dimensions: 4-1/2" x 3-1/2".
Bottom plate Dimensions: 5" x 4".
U.S. made.
U.S. SHIPMENTS (lower 48)

XD Recovery Kit

The all-in-one recovery kit, w/ heavy-duty gear bag.

Snatch Blocks

HD Snatch blocks - we have one to suit your recovery application.

Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Billet4X4.com.