4X4 RECOVERY GEAR





Pull-Pal Winch Anchor RW16000

- The Big One -


Pull-Pal Works!
 "...the harder you pull on it, the deeper it bites."
THE BEST WINCH IS WORTHLESS WITHOUT SOMETHING TO HOOK ONTO!

The Pull-Pal, a U.S. engineered anchoring tool, is both portable and well-suited for a wide range of environments. Intended as a tool for winching through sand and mud, Pull-Pal's design relies on useful rules of physics. Its hefty plow blade sets firmly and safely into sand, clay, mud hardpan soil and snow. Pull-Pal gets you up and over hill stalls and minimizes dangerous situations. It allows you more control -- even when you are alone. Saves time, transmissions, and tires.

Note: ANY VEHICLE THAT WEIGHS MORE THAN THE RECOMMENDED SIZE YOU CAN USE 2 PULL-PALS IN A "Y" FORMATION WITH A CLEVIS OR A SNATCH BLOCK. THIS GIVES YOU MORE THAN DOUBLE PULLING POWER OF 2 PULL-PALS.

Pull-Pal is designed for winch-equipped JeepsŪ, buggies, campers, 2-wheel drive, 4WD SUVs, Trucks, and HummersŪ. Ideal for construction surveyors, search and rescue, utility, police, and rural maintenance vehicles.

Pull-Pal folds compactly to the size of an ordinary bumper jack for easy storage. It can be mounted inside or outside. It stores easily in an inexpensive gun case. Or take a look at our Pull-Pal carrying case below.


The RW16000 has two 2" wings that make the spade 18" which is good for placement in situations you need a bigger spade. The down tube is reinforced and all components are stronger than smaller Pull-Pals. It weighs 57 lbs. and is the same size as the RW14,000 when the wings aren't on it. The RW16,000 is good for up to 12,000 GVW. The RW16,000 fits in the same Pull Pal case when the wings are detached.

(click images for large view)

RW6000
17x5" SPADE
32" FOLDED LENGTH
20 LBS WEIGHT
USES: ATVs, UTVs & Small 4x4s: Samurai, etc. GVW up to 3,000lbs.

RW11000
21x7" SPADE
45" FOLDED LENGTH
32 LBS WEIGHT
USES: Mid-size 4x4s: Jeeps, Toyotas, Land Rovers, etc. GVW up to 6,000lbs.

RW14000
21x11" SPADE
45" FOLDED LENGTH
40 LBS WEIGHT
USES: Full-size Rigs, Unimogs & H1s, etc. GVW up to 10,000lbs.

RW16000
21x12" SPADE
45" FOLDED LENGTH
43 LBS WEIGHT
USES: Fully-Laden Full-size Rigs, Unimogs & H1s, etc. GVW up to 12,000lbs.

U.S. SHIPMENTS (lower 48)
We do not ship Pull-Pals to AK








Pull-Pal RW16000 w/ HD Carry Bag


(click images for large view)


The Pull-Pal carrying case is the newest alternative to storing & carrying your Pull-Pal. The heavy-duty cordura nylon body surrounds high-density closed cell foam. A reinforced back panel strengthens the case and prevents it from collapsing. There are two cinch straps that secure the Pull Pal in place and a padded panel that separates the spade from the shaft. The case can also be used as a mat protecting you and your tools from cold or muddy ground while working under your vehicle.
One size fits all Pull-Pals.
Cushioned flap between shaft & Spade.
Dimensions: 51" L x 13" W (folded).
Hi-density close cell foam core.
Cinch straps with hook and loop closures.
Lock-stitched for added strength.
Heavy-duty leather wrap-around handle.
Color: Desert Brown.


U.S. SHIPMENTS (lower 48)
We do not ship Pull-Pals to AK

$829.99




Customer Service
"Guys, Just a quick note - used the Pull-pal ground anchor to get out of a very sticky situation in the dunes in Morocco - and it worked brilliantly. Was trying to follow a crest but ended up a little off course at a precarious sideways angle. Was amazed how well it held in very soft sand. Unfortunately I haven't got any good pics because at the time all thoughts were on how we were going to get the hell out of there and not end up on the roof! "

Nick Tudor
Professional Photographer


Pull-Pal is ruggedly constructed with a forged chrome-moly plow assembly, welded construction overall, and assembled with Grade 8 bolts for strength and quality.

Pull-Pal gets your rig out...fast. Simply insert the plow point into the soil. As the winch cable tightens, the point embeds itself deeply and firmly into the ground and frees your rig with the assistance of the wheels in motion.
Note: The four models of Pull-Pal anchors are rated for different size vehicles. Please ensure you choose the correct anchor for your 4x4.

"Up on the frozen slopes of Mount Washington, anchor points are few past the tree line. The Pull Pal would dig in and yank us out every time. That's when I started to get impressed. On the ascent itself, the Pull-Pal yanked our frozen butts out of the snow so many times that I lost count. We literally would not have made it without the Pull-Pal. Since then, I've seen it used in dirt and sand and was equally impressed."

Getting Stuck
by Jim Allen


Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Billet4X4.com.