Recovery Chain
(click image for large view)
As well as for vehicle recovery, the
recovery chain is used to drag fallen trees and logs off 4WD trails.
It is plated to prevent rust, and comes with chain hooks (2). The chain is particularly useful
for securing a winch anchor point in rocky areas where a nylon tree strap is not suitable. Our recovery chains are made from Boron treated steel which provides a high strength to weight
ratio. It is superior for use in towing, recovery and safety chains. Every 4WD owner should carry a recovery chain in heavy conditions.
They will last a lifetime and have absolutely unlimited uses.
Plated to prevent rust.
Two (2) chain hooks per chain.
5/16" x 20' recovery chain with hooks.
3/8" x 20' recovery chain with hooks.
5/16" x 10' recovery chain with hooks.
3/8" x 10' recovery chain with hooks.
3/8" Chain
6,600 lb Working Load Limit
26,400 lb Ultimate Strength
5/16" Chain
4,700 lb Working Load Limit
18,800 lb Ultimate Strength
(click image for large view)
Don't just throw that recovery chain in
the back! Store it carefully in our handy kit bag, and it will be there for you when you need
it.
15" wide-mouth Gear Bag, heavy-duty nylon zipper,
outer pockets, and hard fiber floor.
Holds your recovery straps too.
Price Saving:
The Recovery kit bag has a retail value of $25
HERE. Get it here with your recovery chain for $15.
U.S. SHIPMENTS (lower 48)
20ft. Length
10ft. Length
Disclaimer. Please read:
The effectiveness of this equipment is directly related to the manner in which it is installed,
used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of
the installer/user, and will not be assumed by Billet4X4.com.
